Expansion Joint Devices AQUASTOP Type DGK-FAS/090

dgk-fas
dgk-fas_montage_duo

Expansion Joint Device AQUASTOP DGK-FAS/090 is a 3-meter long shaped deformation joint. This device is suitable for joint finishing on facades and performs both protective and decorative functions. Designed for connections (wall-to-wall) in critical structures. The compensator is made of thermoplastic elastomer (TPE), which ensures compensation of significant displacements. Reduces stresses caused by shrinkage and temperature fluctuations. Withstands wind loads.

Displacement, mm

Compression: 16
Tension: 50
Shear: 32

881,00 ₽

Price/l.m.
loader-icon

Expansion Joint Devices AQUASTOP DGK-FAS/090 are designed for protecting joints in building facades in areas with wind loads. The device ensures reliability and protection of joints. Joint width — 090 mm. The guides are installed using embedded method. The device consists of perforated aluminum guides and an elastic profiled compensator made of thermoplastic elastomer (TPE) in the center.

Technical advantages:

  • Material: aluminum guides (GOST standard), compensator – wear-resistant TPE.
  • Strength: designed for mechanical and operational loads.
  • Corrosion resistance: resistant to moisture, temperature fluctuations, aggressive environments.
  • Durability: aluminum is corrosion-resistant, compensator can be replaced without dismantling the profile.

Installation:

  • Installation method: anchor-type, with fixation of guides in concrete base.
  • Mounting: mechanical overlay installation using anchors or dowels.

Additional information

Compensator Material

TEP
Country of manufacture

Russia
Profile Type

Straight
Installation Type

Embedded
Load - MPa

no
A (Joint Width), mm

90
B (Insert Width), mm

94
С (ширина профиля), мм

94
Length

3000 mm

Installation Guidelines for AQUASTOP® DGK-FAS Expansion Joint Devices

  1. Preparatory Work:
    • Clean the base surface from dirt, debris, and dust.
    • If necessary, level the base with a polymer-cement mixture or equivalent.
    • Repair defects (cracks, pores, exposed reinforcement).
  2. Temperature Conditions: Perform work at air temperatures between +5°C and +30°C.
  3. Layout and Gaps:
    • Install beacons according to the finished floor level (starting from a reference point near the wall).
    • Leave a damping gap ≤10 mm along the perimeter of the walls.
  4. Device Installation:
    • Assemble the sections, embedding the support parts into adhesive/sealant.
    • Join sections with 150 mm staggered seams.
    • ⚠️ Prohibited: Use anchor fasteners.
  5. Additional Operations (if required):
    • Fill gaps with polyurethane sealant.
    • Perform thermal welding of the compensator (185–195°C).
    • Apply primer (composition: specify in the project).

Installation diagram of AQUASTOP® DGK-FAS expansion joint device

Universal Requirements:
- Compliance with SP 71.13330-2017;
- Check base evenness with a straightedge (tolerance: ≤2 mm longitudinally, ≤1 mm transversely);
- Fastener tightening torque: (specify for particular model);
- All parameters (A, B, C) are determined by the project.

⚠️ Important! For non-standard conditions, consult OOO TD "GYDROMIX".

Download Files for AQUASTOP® DGK-FAS Expansion Joint Devices

PDFDownload Aquastop Product Catalog Part 2: Expansion Joint Devices
PDFСкачать описание устройств тип ДГК-ФАС АКВАСТОП

Recently viewed products

DVS-11/060, Ver.-3

13200,00 ₽

DSHN – ANG/115

4005,00 ₽

Related products

Request a Quote

Blank Form (#2)

2009 – 2025 GYDROMIX – Waterproofing, Repair, and Protection – Foundations, Utility Entry Points, Roofs, and Reservoirs
Privacy Policy

8 800 500-73-22

hello@hitcord.ru