Expansion Joint Devices AQUASTOP Type DGK-15-ANG.SH/035

dgk-15-ugl
dgk15_montage_duo

Expansion Joint Device AQUASTOP DGK-15-ANG.SH/035 is a 3-meter long embedded deformation joint designed for corner joint installation. This device is suitable for both indoor spaces and open areas. It is engineered to compensate for deformations in horizontal and vertical structures, specifically for corner connections (floor-to-wall, wall-to-ceiling). It reduces stresses caused by shrinkage and temperature fluctuations. Not designed for load-bearing applications.

Displacement, mm

Compression: 2
Tension: 10
Shear: 5

865,00 ₽

Price/l.m.
loader-icon

Expansion Joint Devices AQUASTOP Type DGK-15-ANG.SH/035 designed for protecting corner joints in horizontal and vertical structures (wall, floor, and ceiling connections). Performs aesthetic and protective functions while compensating for significant displacements. Embedded installation ensures simple integration into finishing coatings. Joint width – 35 mm. Suitable for joints in floor structures with thickness – 15 mm. Equipped with a thermoplastic elastomer (TEP) compensator that can be easily replaced when worn.

Technical advantages:

  • Material: aluminum guides (GOST standard), compensator – wear-resistant TEP.
  • Strength: designed for operational loads.
  • Corrosion resistance: resistant to moisture, temperature fluctuations, aggressive environments.
  • Durability: aluminum is corrosion-resistant, compensator can be replaced without dismantling the profile.

Installation:

  • Mounting: mechanical overlay installation using anchors or dowels.
  • Additional: corner configuration for complex joints (e.g., wall-to-floor transitions).

Additional information

Compensator Material

TEP
Country of manufacture

Russia
Profile Type

Angular
Installation Type

Embedded
Load - MPa

no
A (Joint Width), mm

35
B (Insert Width), mm

22
C (Profile Width), mm

72
Profile Height, mm

15
Length

3000 mm

Installation Guidelines for AQUASTOP® DGK Expansion Joint Devices

  1. Preparatory Work:
    • Clean the base surface from dirt, debris, and dust.
    • If necessary, level the base with a polymer-cement mixture or equivalent.
    • Repair defects (cracks, pores, exposed reinforcement).
  2. Temperature Conditions: Perform work at air temperatures between +5°C and +30°C.
  3. Layout and Gaps:
    • Install beacons according to the finished floor level (starting from a reference point near the wall).
    • Leave a damping gap ≤10 mm along the perimeter of the walls.
  4. Device Installation:
    • Assemble the sections, embedding the support parts into adhesive/sealant.
    • Join sections with 150 mm staggered seams.
    • ⚠️ Prohibited: Use anchor fasteners.
  5. Additional Operations (if required):
    • Fill gaps with polyurethane sealant.
    • Perform thermal welding of the compensator (185–195°C).
    • Apply primer (composition: specify in the project).

Installation diagram of AQUASTOP® DGK expansion joint device

Universal Requirements:
- Compliance with SP 71.13330-2017;
- Check base evenness with a straightedge (tolerance: ≤2 mm longitudinally, ≤1 mm transversely);
- Fastener tightening torque: (specify for particular model);
- All parameters (A, B, C) are determined by the project.

⚠️ Important! For non-standard conditions, consult OOO TD "GYDROMIX".

Download Files for AQUASTOP® DGK Expansion Joint Devices

PDFDownload Aquastop Product Catalog Part 2: Expansion Joint Devices

PDFDownload AQUASTOP DGK Device Specifications

Recently viewed products

No recently viewed products to display

Related products

Request a Quote

Blank Form (#2)

2009 – 2025 GYDROMIX – Waterproofing, Repair, and Protection – Foundations, Utility Entry Points, Roofs, and Reservoirs
Privacy Policy

8 800 500-73-22

hello@hitcord.ru