Expansion Joint Device AQUASTOP DPSH-30-ANG/050 (Al) is a 3-meter long embedded expansion joint. This device is suitable for both indoor spaces and open areas. Designed for angular connections (wall-to-floor, wall-to-ceiling) in critical structures. Reduces stresses caused by shrinkage and temperature fluctuations. Withstands light vehicle loads.
4859,00 ₽
Expansion Joint Devices AQUASTOP Type DPSH-30-ANG/050 (Al) are designed for protecting corner joints in horizontal and vertical structures (wall, floor, ceiling junctions, transitions between rooms). Withstands light vehicle loads and compensates for displacements. Joint width — 50 mm. Suitable for joints in floor structures with thickness — 30 mm. The guides are installed using embedded method.
| Compensator Material | TEP |
|---|---|
| Country of manufacture | Russia |
| Profile Type | Angular |
| Installation Type | Embedded |
| Load - MPa | 3,0 |
| A (Joint Width), mm | 50 |
| B (Insert Width), mm | 78 |
| C (Profile Width), mm | 130 |
| Profile Height, mm | 30 |
| Length | 3000 mm |
Universal Requirements:
- Compliance with SP 71.13330-2017;
- Check base evenness with a straightedge (tolerance: ≤2 mm longitudinally, ≤1 mm transversely);
- Fastener tightening torque: (specify for particular model);
- All parameters (A, B, C) are determined by the project.
⚠️ Important! For non-standard conditions, consult OOO TD "GYDROMIX".
2009 – 2025 GYDROMIX – Waterproofing, Repair, and Protection – Foundations, Utility Entry Points, Roofs, and Reservoirs
Privacy Policy
Download Aquastop Product Catalog Part 2: Expansion Joint Devices
