Expansion Joint Devices AQUASTOP Type DVS-11/060, Ver.-3

dvs
dvs_montage

Expansion Joint Device AQUASTOP DVS-11/060, Ver. 3 is a 3-meter long embedded deformation joint designed for joint installation. This device is suitable for both indoor spaces and open areas. It is engineered to compensate for deformations in horizontal and vertical structures (floors, walls, ceilings), reducing stresses caused by shrinkage and temperature fluctuations. It withstands pressures up to 200 MPa and ensures seamless passage of equipment.

Displacement, mm

Compression: 20
Tension: 20
Shear: 2

13200,00 ₽

Price/l.m.
loader-icon

Expansion Joint Profile DVS-11/060, Ver. 3 – designed for installing deformation joints on surfaces subjected to high loads. It can be used in areas where pressure reaches up to 200 MPa, making it ideal for military training grounds, warehouses with intensive use of steel-wheeled forklifts, and other zones with extreme loads.

Features:

  • Material: stainless steel AISI 430
  • Withstands pressure up to 200 MPa
  • Ensures smooth passage of wheeled vehicles, crucial for protecting both equipment and surfaces

Application:

  • Areas of use: Military training grounds, warehouses with heavy transport vehicles, other facilities with high floor loads

Installation:

  • Installation method: Profile is installed using embedded method under finishing coating
  • Installation requirements: Standard embedded technology must be followed to ensure optimal integration with the coating structure

Additional information

Compensator Material

Steel
Country of manufacture

Russia
Profile Type

Straight
Installation Type

Embedded
Load - MPa

200
A (Joint Width), mm

60
B (Insert Width), mm

240
C (Profile Width), mm

240
Profile Height, mm

11
Length

3000 mm

Installation Guidelines for AQUASTOP® DVS Expansion Joint Devices

  1. Preparatory Work:
    • Clean the base surface from dirt, debris, and dust.
    • If necessary, level the base with a polymer-cement mixture or equivalent.
    • Repair defects (cracks, pores, exposed reinforcement).
  2. Temperature Conditions: Perform work at air temperatures between +5°C and +30°C.
  3. Layout and Gaps:
    • Install beacons according to the finished floor level (starting from a reference point near the wall).
    • Leave a damping gap ≤10 mm along the perimeter of the walls.
  4. Device Installation:
    • Assemble the sections, embedding the supporting parts into adhesive/sealant.
    • Join sections with 150 mm staggered seams.
    • ⚠️ Prohibited: Use anchor fasteners.
  5. Additional Operations (if required):
    • Fill gaps with polyurethane sealant.
    • Perform thermal welding of the compensator (185-195°C).
    • Apply primer (composition: specify in the project).

Installation diagram of AQUASTOP® DVS expansion joint device

Universal Requirements:
- Compliance with SP 71.13330-2017;
- Check base evenness with a straightedge (tolerance: ≤2 mm longitudinally, ≤1 mm transversely);
- Fastener tightening torque: (specify for particular model);
- All parameters (A, B, C) are determined by the project.

⚠️ Important! For non-standard conditions, consult OOO TD "GYDROMIX".

Download Files for AQUASTOP® DVS Expansion Joint Devices

PDFDownload Aquastop Product Catalog Part 2: Expansion Joint Devices
PDFDownload AQUASTOP DVS Device Specifications

Recently viewed products

No recently viewed products to display

Related products

Request a Quote

Blank Form (#2)

2009 – 2025 GYDROMIX – Waterproofing, Repair, and Protection – Foundations, Utility Entry Points, Roofs, and Reservoirs
Privacy Policy

8 800 500-73-22

hello@hitcord.ru