Expansion Joint Devices AQUASTOP Type ДПВ-8/080-СН

dpv
dpv_montage

Expansion Joint Device AQUASTOP DPV-8/080-CH is a 3-meter long overlay expansion joint designed for joint installation. This device is suitable for both indoor spaces and open areas. Engineered to compensate for deformations in horizontal and vertical structures (floors, walls, ceilings). Reduces stresses caused by shrinkage and temperature fluctuations. Withstands freight vehicle loads.

Displacement, mm

Compression: 20
Tension: 40
Shear: 70

7258,00 ₽

Price/l.m.
loader-icon

Expansion Joint Devices AQUASTOP Type DPV-8/080-CH – for use in underground parking facilities where reliable expansion joints are required. These devices support a narrow range of joint width and can withstand loads from light vehicles and medium-duty transport. Minor vertical displacement is allowed, providing flexibility to adapt to various conditions.

Technical advantages:

  • Materials: structure made of durable aluminum, stainless steel or painted steel, with compensator made of thermoplastic elastomer resistant to aggressive chemicals.
  • Strength: design adapted to work under loads and dynamically changing conditions.
  • Corrosion resistance: resistant to moisture and sharp temperature changes.
  • Durability: thanks to selected materials, the devices promise reliable and long-term operation even in aggressive conditions.

Installation:

  • Mounting: mechanical overlay installation using anchors or dowels.

Additional information

Compensator Material

TEP
Country of manufacture

Russia
Profile Type

Straight
Installation Type

Embedded
Load - MPa

1,5
A (Joint Width), mm

70
B (Insert Width), mm

270
C (Profile Width), mm

270
Profile Height, mm

8
Length

3000 mm

Installation Guidelines for AQUASTOP® DPV Expansion Joint Devices

  1. Preparatory Work:
    • Clean the substrate surface from dirt, debris, and dust.
    • If necessary, level the substrate with a polymer-cement mixture or equivalent.
    • Repair defects (cracks, pores, exposed reinforcement).
  2. Temperature Conditions: Perform installation at air temperatures between +5°C and +30°C.
  3. Layout and Gaps:
    • Install beacons according to the finished floor level (starting from a reference point near the wall).
    • Maintain an expansion gap of ≤10 mm around the perimeter of walls.
  4. Device Installation:
    • Assemble sections by embedding support components in adhesive/sealant.
    • Connect sections with 150 mm staggered joints.
    • ⚠️ Prohibited: Use anchor fasteners.
  5. Additional Operations (if required):
    • Fill gaps with polyurethane sealant.
    • Perform thermal welding of the compensator (185-195°C).
    • Apply primer (composition: as specified in project documentation).

Installation diagram of AQUASTOP® DPV expansion joint device

Universal Requirements:
- Compliance with SP 71.13330-2017;
- Verify substrate evenness using a straightedge (tolerance: ≤2 mm longitudinally, ≤1 mm transversely);
- Fastener tightening torque: (specify for particular model);
- All parameters (A, B, C) to be determined by project specifications.

⚠️ Important! For non-standard conditions, consult OOO TD "GYDROMIX".

Download Files for AQUASTOP® DPV Expansion Joint Devices

PDFDownload Aquastop Product Catalog Part 2: Expansion Joint Devices
PDFDownload AQUASTOP DPV Device Specifications

Recently viewed products

No recently viewed products to display

Related products

Request a Quote

Blank Form (#2)

2009 – 2025 GYDROMIX – Waterproofing, Repair, and Protection – Foundations, Utility Entry Points, Roofs, and Reservoirs
Privacy Policy

8 800 500-73-22

hello@hitcord.ru